My Hobby CNC: https://bit.ly/longmillcncref CNC Routers for Hobbyists can be intimidating! In this video, I'll cover all the CNC basics that you must know before being able to run the machine. This includes CAD, CAM, Feeds and Speeds, Toolpaths, G-code, and setting up the machine. MY FAVORITE BITS AND ACCESSORIES Surfacing Bit - https://geni.us/GaBB Starter Set (8 Piece) - https://geni.us/starterSet 1/4" End Mill (most common) - https://geni.us/endMill Double-Sided CNC Tape - https://geni.us/cncTape 48" T-track - https://geni.us/tTrack T-track Clamps - https://geni.us/tClamps DeWalt 611 Router - https://geni.us/6bmzK7 TIMESTAMPS 0:00 - CNC basics overview 0:39 - 3 common steps 1:13 - What is CAD? 2:00 - 3 different cutting strategies 3:05 - What is CAM? 4:11 - Speed and Feed explained 5:04 - What is a toolpath? 6:20 - What is G-Code? 7:24 - Getting the g-code to the machine 7:55 - Setting up the machine TOP FUSION 360 PLAYLISTS http://bit.ly/learn-fusion360 http://bit.ly/woodworker-playlist http://bit.ly/3D-printing-playlist http://bit.ly/sculpt-playlist DISCLAIMER This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps you support the channel at no extra cost to you and allows me to continue to make videos like this. — #CNC #woodworking #Fusion360 #ProductDesignOnline